IDesigners of Madok heat exchangers, stainless steel pressure blowers, induscr draft ventilators, force draft ventilators, leader ventilators, high pressure centrifugal blowers, high CFM axial fans, high air flow ventilators, dust collecting fans, radial pressure blowers, vacuum blowers & fans, stainless steel ventilation fans, air handling fans, airhandling blowers, FRP pressure blowers, SST pressure fans, oven & dryer circulation fans, drying blowers. ndustrial centrifugal power roof and wall exhaust and air make up ventilators - exhaust and supply fans. Sales of commercial and industrial power roof and wall fan ventialtors, propeller axial fans and blowers.
ILG Fans Ventialtors

 The use of HS PRVs to vent heat and smokes has these specific advantages: * It is not dependent on air temperature differential or wind direction and velocity to create air movement. * It does not rely on heat itself to activate the system. Smoke detectors and water-flow devices also may be utilized. * It provides for normal ventilation needs of the building as well as for emergency use as a vital component of the fire protection system. * There is usually a substantial cost saving in the purchase and installation of the dual purpose system. * Maintenance cost for building and equipment is frequently reduced. * The system can be effectively used in multi stories and below grade building areas. * Reliability of operations is assured because powered ventilators are in daily use and receive regular inspection and maintenance. The unique Canada Blower Type HS power roof ventilators provide a solution for emergency heat and smoke venting that is dependable under the most extreme circumstances. All critical components of Canada Blower HS PRV that exposed to the air-stream are ferrous construc-tion to withstand high temperature c onditions . These heavy gauge materials prevent warping of fan parts and malfunc-tion at high temperatures. This also insures years of trouble-free service in normal daily operation of the PRV fan. The wind shroud is made of galvanized steel; an exterior finish coat of epoxy can be specified. Painted parts are coated with epoxy to provide a protective coating rated excellent for hardness, impact resistance, adhesion and chemical resistance.

 

 

Fans and Blowers

ILG Fans ILG Fans
UBCA
Upblast Power Roof Ventilators

The UBCA is an upblast power roof ventilator designed for the exhaust of grease-laden air from restaurant range hoods, and general ventilation applications where vertical discharge of exhaust air is required. Fan applications include all types of commercial and institutional kitchens, such as restaurant and cafeteria, fast food , hotel and motel, bakery, delicatessen, school, hospital and military.

CUBA
Belt Drive Upblast Power Roof Ventilators

The CUBA Upblast Power Roof Ventilator is designed for the ventilation of grease laden air from restaurant range hoods and general ventilation applications where a vertical air discharge is desired. Applications include all types of commercial and institutional kitchens such as those found in restaurants and cafeterias, fast food outlets, hotels and motels, bakeries, delicatessens, schools, hospitals and military establishments. 

CUDA
Direct Drive Upblast Power Roof Ventilators

The CUDA Upblast Power Roof Ventilator is designed for general and spot ventilation of problem areas in single or multi-story structures. Such applications include warehouses, garages, plants, sports arenas, athletic clubs, hospitals and shopping centers.

CRBA
Belt Drive Power Roof Ventilators

The CRBA fans are quiet, dependable power roof ventilators recommended for a wide range of general exhaust applications where low and medium ranges of air volume and pressure are specified. Applications include virtually all types of light manufacturing, commercial and institutional buildings such as shopping centers, hospitals, schools, hotels, office and apartment buildings, warehouses, airports, bus terminals, and many others.

CRF
Direct Drive Power Roof Ventilators

CRF fans are quiet, dependable power roof ventilators recommended for a wide range of general exhaust applications where relatively low ranges of air volume and pressure are specified. Applications include virtually all types of commercial and institutional buildings such as shopping centers, hospitals, schools, hotels, office and apartment buildings, warehouses, airports, bus terminals, and many others. 

CRBCA
Belt Drive Power Roof Ventilators

The CRBCA ventilators are quiet, dependable power roof ventilators recommended for a wide range of general exhaust applications where relatively low ranges of air volume and pressure are specified. Applications include virtually all types of commercial and institutional buildings such as shopping centers, hospitals, schools, hotels, office and apartment buildings, warehouses, airports, bus terminals, and many others. 

CWBA
Belt Drive Wall Exhaust Fans

The CWBA Wall Centrifugal General Exhaust Fan, designed for ventilation of problem areas in single or multi-story structures, is the first Fan of this type to use American Coolair’s Unique C-Drive. Applications include warehouses, garages, plants, sports arenas and athletic clubs, hospitals and shopping centers. 

CWDA
Direct Drive Wall Exhaust Fans

The CWDA is a general exhaust Fan designed for spot ventilation of problem areas in single or multi-story structures. Such applications include warehouses, garages, plants, sports arenas and athletic clubs, hospitals and shopping centers. 

SQB
Belt Drive Square In-Line Fans 

The SQB Square In-Line Centrifugal Fans are designed to provide efficient air movement in ducted or non-ducted ventilation systems. Designed for easy positioning and quick installation, the versatile Square In-Line can be located inside equipment rooms, in ceiling spaces or as parts for O.E.M. equipment. 
 

SQD
Direct Drive Square In-Line Fans 

The SQD Square In-Line Centrifugal Fans are designed to provide efficient air movement in ducted or non-ducted ventilation systems. Designed for easy positioning and quick installation, the versatile Square In-Line can be located inside equipment rooms, in ceiling spaces or as parts for O.E.M. equipment. 

TRIMLINE Hoods and Ventilators
 
For Exhaust Relief Fresh Air Intake or Gravity Ventilation Systems. Modernistic low silhouette style to blend in with roof top lines and equipment. Designed with improved aerodynamically shape air flow passages. 

Exhaust Relief Ventilators Models TEV

Exhaust Relief Ventilators have a 1 to 1 ratio of hood perimeter opening to throat area. 

Fresh Air Intake Ventilators Models TIV

Fresh Air Intake Ventilators have a 2 to 1 ratio of hood perimeter opening to throat area.

LOUVERLINE
Penthouses and Ventilators

The louvered look - a favorite selection for modern architectural eye appeal. 

Penthouses - to dress up and beautify roof tops by enclosing unattractive mounted equipment viewed from higher floors and taller buildings. 

Ventilators - For Exhaust Relief and Fresh Air Intake Ventilating Applications. Fan capacities up to 103,900 CFM. 

Exhaust Relief Models LVX

Exhaust Ventilators are designed for a maximum air velocity of 1200 fpm through the louvered openings and 1200 fpm through the throat. 

Fresh Air Intake Models LVN

Air Intake Ventilators are designed for a maximum inlet velocity of 600 fpm to reduce entrainment of rain or snow to a minimum. The maximum throat velocity is 1200 fpm. 


 

ventilator
UBCA - Sizes 12 to 20
165 to 19797 CFM
to 3" Static Pressure 
fan
CUBA - Sizes 12 to 20
711 to 5709 CFM
to 2" Static Pressure 
roof ventilator
CUDA - Sizes 06 to 20
133 to 4857 CFM
to 2" Static Pressure 
roof fan
CRBA - Sizes 12 to 20
245 to 34963 CFM
to 2" Static Pressure 
ventilation fan
CRF
ventilating fan
CRBCA - Sizes 06 to 20
95 to 6253 CFM
to 2" Static Pressure 
centrifugal wall fan
CWBA - Sizes 12 to 20
165 to 19797 CFM
to 3" Static Pressure 
centrifugal wall ventilator
CWDA - Sizes 06 to 20
133 to 4857 CFM
to 2" Static Pressure 
duct fan
SQDA - Sizes 06 to 18
122 to 4024 CFM
to 2" Static Pressure 
SQBA - Sizes 12 to 20
245 to 23056 CFM
to 3" Static Pressure 
roof fan
Production of air scrubber blowers, fume collector fans,  positive displacement blowers, Aeroven Blowers, Twin City, NYB fans, blowers & fans repair and rebuild, Lau fans, plug fans ventilators, sheldons fans blowers, cooling fans, FRP ventilators, industrial mancoolers, Cincinnati fans / blowers,  air polution control ventilators, blowers and fan exhaust systems, air make-up fans, air knife pressure blowers, high pressure blowoff fans, burner blowers, combustion process fans, conveyor blow-off fans, air canon fans, dust collector blowers, finishing systems fans, fan exhausters, fume exhaust ventilators, furnace fan blowers, incinerator fans.

















Canadian Blower industrial blowers, commercial fans, high-temperature industrial blowers, Canadian Blower pressure blowers,  Canadian Blower OEM industrial fans, roof and wall exhausters, ventilating and air-conditioning equipment.

Supply of HVAC fans and blowers, large fan ventilators, commercial ventilators & fans, portable blowers fnas, electric blowers & fans, heavy duty blowers, cooling ventilators, direct drive blowers, ventilation fans, multistage blowers, high volume ventilator fans, rotary lobe pressure blowers, fan / blower packages.

Engineering sales of industrial and commercial heating, ventilation and air-conditioning (HVAC) equipment, high pressure blowers, industrial fans and ventilators, high temperature oven fans and blowers, centrifugal and axial blowers and fans.
Air fans, blowers and ventilators for industrial plants from Buffalo, New York. Sales of industrial axial power roof and wall ventilators, exhaust and supply centrifugal spun aluminum fans and blowers. Industrial high pressure blowers and OEM blower / fan ventilators. Sales of high temperature Buffalo Blower fans, process pressure blowers, high temperature fan blowers. Suppliers of Buffalo Blower industrial; process and commercial heating; ventilating and air handlers. Axial fans are provided at Canada Blower. We offer wheel diameters in sizes up to 85". CFMs up to 300,000. Axial fans are manufactured with the option of direct drive and belt drive. Pressure up to 14 in. WG.
ventilating.com fanblower.com highpressureblower.net industrialblowerfan.com industrialfanblower.net industrialfanblower.com pressureblower.net northernindustrialsupplycompany.com industrialpressureblower.com tenderall.com chicagoblowercanada.com cbblower.com buffaloblower.com buffalofan.com nis-co.com canadianblower.com olegsystems.com canadablower.com abbblower.com acmefan.net industrialblower.net fansandblowers.net americanblower.net barryfan.com cincinnatifan.net canadafans.com barryfan.net pennbarry.net pennfan.net tcffan.com


ILG Fans and Blowers manufactured by Canada Blower

Canada Blower UBC, UBCA, UBCHD, UDC, UDCA, CUB, CUD, CUBA, CUDA - spun aluminum centrifugal upblast power roof ventilators in UL 705 and UL 762 grease extractor construction. Sizes: 6 to 44. Capacity: up to 30,000 CFM. Pressure: up to 3 inches of WG. Accessories: gravity shutter, motorized back draft damper, roof curb, grease box, disconnect switch, controls.

CFS, SIS: filtered air supply makeup air roof ventilators with side, or downblast discharge. Sizes: 9 to 2. Capacity: up to 10,000 CFM. Pressure: up to 1.5 inches of WG. Accessories: inlet transition, 2 inch filter, roof curb, motorized damper, controls.

Canada Blower CVV, CHV, QA, CFL, IL ceiling fans. Capacity up to 3000 CFM. Pressure: up to 1.5 inches of water gauge. Accessories: roof cap, wall cap, damper kit, wall kit, duct transition, speed controler.

CRD, CRDA, CRF, CRB, CRBCA, CRB: spun aluminum centrifugal downblast power roof ventilators. Sizes: 6 to 52. Capacity: up to 45,000 CFM. Pressure: up to 2.5 inches of water gauge. Accessories: gravity shutter, motorized back draft damper, roof curb, grease box, disconnect switch, controls.

Canada Blower CWD, CWDA, CWB, CWBA: spun aluminum centrifugal wall ventilators. Sizes: 6 to 20 inches. Capacity: up to 6000 CFM. Pressure: up to 2 inches of water gauge. Accessories: gravity shutter, motorized back draft damper, wall flange, speed controller, controls.

LSQB, SQBA, SQB, SQDA, SQD: centrifugal in-line duct ventilators. Sizes: 6 to 36. Capacity: up to 25,000 CFM. Pressure: up to 2 inches of water gauge. Accessories: inlet guard, outlet guard, mount feet, inlet flange, outlet flange, duct connector, vibration isolation bracket, motor and drive cover, protective coatings, speed controller, controls.

Canada Blower BCM, VSBC, VSFC, VSAC utility vent sets and junior vent sets: VSFCJ, VSDDF, VSBCJUBC in UL 705 and UL 762 grease extractor construction. Sizes: 5 to 36. Capacity: to 30,000 CFM. Pressure: up to 10 inch. Accessories: inlet flange, outlet flanges, access door, drain, drain plug, shaft cooler, high temperature construction, shaft seal, motor cover, belt guard, spring vibration isolators, RIS rubber-in-share vibration isolators, outlet dumper, gravity shutter, adjustable speed drive, custom finish coating, disconnect switch, VFD drives, controls.

Trimline TEV, TIV: hoods and roof gravity ventilators. Custom sizes. Accessories: gravity automatic damper shutter, motorized damper, roof curb.

Canada Blower ARVE, SASD, SAED: - spun aluminum gravity ventilators. Sizes from 6 to 37. Capacity to 40,000 CFM. Accessories: gravity automatic damper shutter, motorized damper, roof curb.

Louverline penthouses and ventilators. Custom sizes.